You Can Make This Too — YouCanMakeThisToo

How to Flatten a Slab with a Circular Saw or Router

Watch to see how to build a simple sled that will let you flatten wood slabs with just a circular saw or router!

All Projects, Techniques & TipsCaleb HarrisNovember 6, 2017Circular Saw, Router, Slab, Wood Working Fundamentals, Jig, Wood WorkingComment

How To Make A Hanging Essential Oils Rack

Check out how I used some scrap to make a nice hanging essential oils rack to store our oils!

All Projects, Small ProjectsCaleb HarrisOctober 19, 2017Red Oak, Shelves, storage, Wood Working Comment

How To Make a Matching Cheese Board and Knife

Watch how I take some off cuts and a knife kit and make a matching cheese board and cheese knife set for a friend!

How To Make Pizza Peels

Check out how I batch out some pizza peels using some offcuts and scraps!

How To Make DIY Clipboards | Take Notes in Style

Check out how I made these clipboards that I batched out for a craft show. It is really easy to scale this up or down to make more or less clipboards, of many different styles! You could make them even more simple, or as fancy as you desire.

All Projects, Small ProjectsCaleb HarrisAugust 21, 2017Clipboard, Maple, Wood Working, Walnut Comment

Walnut Slab Dining Table

You don't need many tools to make a slab table like this. You could do it with just a sander, drill, jigsaw, and chisels!I use my circular saw, router, and bandsaw because I have them, but they can be substituted with the other tools.

Furniture Projects, All ProjectsCaleb HarrisAugust 10, 2017Dining Table, Desk, Table, Fine Wood Working, Wood Working, WalnutComment

Reclaimed Walnut Firewood Peppermill Grinder

With three tools and a microwave I made a peppermill from some walnut firewood I picked up off the side of the road.

Wood Turning, All ProjectsCaleb HarrisAugust 3, 2017Peppermill, wood turning, Pecan, Kitchen ItemsComment

Screenprinting Frames

Need some screen printing frames? They're super easy to make, let me show you.

All Projects, Small ProjectsCaleb HarrisJuly 27, 2017screen printing, Wood Working Comment

DIY Portable Workbench | How To

All Projects, Shop ProjectsCaleb HarrisJuly 13, 2017work bench, pine, Wood Working Comments

DIY T-Shirt Screen Printing in 2 Colors | How To

Techniques & Tips, All ProjectsCaleb HarrisJuly 8, 2017screen printingComment

Screen Printing: Failing to Success

This is my first time ever screen printing, it kinda worked. But most importantly, now I know how to make it work.

Techniques & Tips, All ProjectsCaleb HarrisJune 15, 2017screen printingComment

Cordesman, Meyer & Co. 12" Jointer Setup

I’d been without a jointer for a while and was debating whether or not to get one. Then I saw this.

Shop Projects, Techniques & TipsCaleb HarrisJune 10, 2017Jointer, Setup, Machines Comment

Miter Saw Station // How To

I was tired of using my miter saw on the floor and not having any storage in my shop, so I fixed it!

Replace a Picket Fence // No Concrete Mixing // How To

After a bad storm damaged my fence, I decided it was best to just replace that whole side of fencing. This was pretty easy following quikrete's no mix process for setting posts.

All Projects, RemodelingCaleb HarrisApril 16, 2017repair, Fence, Wood WorkingComment

Modified Paulk Workbench with Downdraft Table

Know what makes working a lot more fun? Having a good bench to work on. Know what’s not any fun? Building a workbench, without a workbench.

Get Perfect Miter Saw Cuts // How To

Frustrated with fit up after cutting on the miter saw? It probably just needs to be calibrated, and it’s way easier than you think!

Techniques & Tips, All ProjectsCaleb HarrisMarch 15, 2017calibrate, miter saw, tips, tools, SetupComment

Ana White Rustic X Bookshelves // How To

Need a quick way to make stylish bookshelves? This is a good one. The best part is this can all be made from construction lumber from a big box store. And if you own a table saw, you can save some cash by ripping everything out of 2x6s.

All Projects, Furniture ProjectsCaleb HarrisMarch 14, 2017bookshelf, pine, storage, Shelves, Wood WorkingComment

Budget DIY Solar Kiln

I got my hands on some tree parts locally that I want to use in a workbench later, but needed and cheap and easy way to speed up drying them.

All ProjectsCaleb HarrisMarch 13, 2017drying wood, kiln, Solar KilnComment

Cedar Fence Picket Planters

All Projects, Small ProjectsCaleb HarrisFebruary 13, 2017box, garden, PlanterComment

Crossbow Bolt Pen: No Pen Lathe Challenge

Bill Livolsi issued a challenge, to make a pen without a lathe. No other rules, just no lathe. With such an open challenge, I had to have fun with it. This was the result. I hope you enjoy it!

All ProjectsCaleb HarrisFebruary 13, 2017challenge, crossbow, penComment